Chris from http://www.icreatables.com/sheds/shed-plans.html teaches you how to install sheet siding on your storage shed! This video describes the steps to installing 4×8 sheet sod T1-11 or other siding. It describes how to:
Square up the shed walls
Install siding around the door opening
Install Z metal flashing on siding joints
How to install siding on the gable ends of the rafters
For Shed Plans to this and other sheds please visit our website at
https://www.icreatables.com/sheds/shed-plans.html
For more Shed Building videos check out our YouTube Channel: https://www.youtube.com/user/icreatablestv
Subscribe to the iCreatablestv channel: http://www.youtube.com/subscription_center?adduser=icreatablestv
WARNING: These projects can be dangerous, posing risks of personal injury, or property damage, and in some cases, death. There may be the possibly other risks of which I am not fully aware. Use of video content and or website information is at your own risk.
Thanks for watching!
I suggest you watch country life projects and Henry Rinders great video real craftsman !
I’ve used a router with a bearing guide to trim panels that are already inplace
@Eric Stadig That is a great way to cut wall sheeting. It works very well when cutting out window openings too.
No plumb and line before shear?
@Stihl Magnum The sheet of siding is square. By aligning two of the edges of the siding up with the wall framing it makes the wall plumb along the axis of the shear. All the stud lengths must be the same lengths. and the top and bottom plates must be the same lengths. Great question.
thanks so much that tell me a whole lot im not a carpenter by any means this HELPS OUT ALOT take care.
Your guides are excellent , the only change id make so far is to nail on the siding before standing up the wall .
+Mike Parker Thanks for watching.
cuanto miden las cabrillas
glad you showed us the tools you used thank you !and the step by step instructions .
+Sunshine Santiago (Sunny) Thanks for watching!!
I am planning on building a shed this summer thank you for showing me how.
Is galvanized nails necessary if the OSB is covered with tyvek and then siding?
I’d like to use my leftover box of coated 8d box nails.
Does the siding have to overlap on top of a stud?
what kind of gun are you using?
what kind of gun are you using?
my builder is staples and the shed rotted all the way around the bottom. Could this have contributed?
Shouldn’t a 1/4′” gap be left on the top side of the Z flashing?
*http://tinyurl.com/yxa3fmyu?-Howw-to-choosee-a-Goodd-Qualityy-Storagee-Sheedd-Planss*
හොඳ තත්ත්වයේ ගබඩා කිරීමේ සැලසුමක් තෝරා ගන්නේ කෙසේද?
මම යෝජනා කරනවා රටක ජිවන ව්යාපෘති සහ හෙන්රි රින්ඩර්ස් හොඳ වීඩියෝ සැබෑ සැබෑ කලාකරුවෙක්!
Any help on a Costco….10×10 Fairfield shed ?
I’ll try to finish before August end so you can maybe do the joiices and logs the rest is inside.
The whole series is very well done. I agree with all the positive comments. Thank you for a nice series.
Does something need to be added to the seams where the walls meet? caulk?